Stage 3 GM turbo kit.

FREE FREIGT IN THE USA ON THIS PRODUCT.

 

You must choose which turbo & tuning option you want for your build...


 

Stage 3 kit seen on PowerNation TruckTech! 

  We now make it easier for you get into a TrickTurbo kit.  You can now place your order with a deposit.  Placing a deposit puts your kit into production.  Once the kit is boxed and ready to ship out you will be contacted for the final payment.  

  Want access to more power on tap, or a larger turbo. Stage 3 has a 76mm turbo* standard. This turbo is capable of producing up to 650 hp to the ground on a 6.0L engine. Stainless steel mandrel bent crossover and 3" down pipe. Mandrel bent hot pipes have smooth bends for better flow capabilities. The intercooler is our Monster 3" core and comes with mounting hardware and tubing cut to length. Cold piping is cut to length and comes with a bead rolled ends. Bead roll keeps the tubing from sliding out while under boost.
Kits comes with a 76mm turbo, standard. Good for 650-700HP to the ground. Thick wall CAST STAINLESS STEEL turbo manfiold. 39mm waste gatekeeps the boost under controll. Waste gate configuration is vented back into the down pipe. This keeps it quiet and allows you to hear the turbo.  The aluminum cold piping has bead rolled ends. These cold pipes will not leak or come apart; even under the highest boost demands. The intercooler is our Monster 3" intercooler core with 3.0" " inlet and outlets.Mounts directly to the A frame core support using our universal brackets. Smaller tubing from the turbo to the intercooler helps keep the air speed up. After the intercooler the piping starts to increase its' size up to 3.5", making the transition to the throttle body clean. 50mm blow off keeps away the turbo surge, and it just sounds cool. Releasing all the boosted air from turbo to throttle when you lift off the throttle. The blowoff protects the turbos for turbo surge and protect the throttle body from having boost pushing on a closed throttle blade. HI boost pressure with out a blowoff can result in damage to your turbo and throttle body blade or shaft..Electric fans are a must with this turbo kit.  Our intercoolers will not fit mechanical clutch fans.Kit is designed to for a 99-2013 2 Wheel and 4 wheel drive GM trucks. . Final kit may look different then in pic. Great kit for modified 4.8-6.0L. When ordering your kit, please tell us your year, make and model in the notes section. 

  

Please allow 3 weeks for delivery. Kits are built as they are ordered.
Final kit will look different then in pic.

TURBO KITS ARE FOR OFF ROAD USE ONLY!!! Customer is responsible for the final exhaust connection and all exhaust work after the downpipe.

  • 76mm Turbo* with turbo BLANKET
  • Precision 39 mm gate (vented into down pipe)
  • 50mm blow-off valve
  • Stainless Steel steel crossover and 3" down pipe with wide band bung
  • CAST STAINLESS STEEL turbo manifold
  • O’ring crossover flange gaskets
  • Spark plug wires
  • Aluminum Cold piping with bead roll
  • Monster 3"  intercooler with mounting hardware**
  • Silicone couplers and clamps
  • Oil pressure and return lines
  • Oil pressure and return fittings
  • Drill and tap for oil return into pan
  • 02 bungs
  • vacuum lines
  • Washer, bolts, and Nuts
  • Large Air Filter
  • 4" 90degree Turbo Elbow Inlet
  • Heater Hose and clamps
  • One check Valve 
  • Breather filter

 

*other turbos are available and will change the price of this kit. Standard Generic Turbo does not come with a Warranty.  PIctures are for reference only. Not an exact parts make up...

** Intercooler can be upgraded to our ,4" or 5" Race intercooler.

---DEPOSIT TAB REMOVES THE AMOUNT FROM YOUR INVOICE.  You will be contacted for the balance once the kit is ready to ship. This is to help custoers that want to spread their turbo bill out" ---


***PARTS REQUIRED BUT NOT SUPPLIED WITH KIT.  Tuning you will need to have your vehicle retuned.  Larger Injectors maybe needed depending on application and power goals.  Final exhaust, the down pipe stops under the passenger side floor board. You will need to fabricate an exhaust system based on your personal perferences. ***

  • 2009 and up.  This adds the a maf flange to your cold pipe and the oil cooler adapter needed for getting oil psi to the turbo.
  • T4 Turbo Blanket.  Helps keep your under hood temps down. 
  • Drill and Tap. Supplies you the proper drill and tap if you want to tap your own oil cover plate for pressurized oil.  Not needed if you have a drill and tap, 09+ truck or you are purchasing and oil block.
  • Turbo Selection.  Only needed if you plan on choosing a different turbo then what comes standard with the kit.
  • Aluminized.  This will change your Stainless Steel hot parts to aluminized. 
  • Water/Meth Adds a water/methanol injection system into your shipment.
  • Intercooler Upgrade.  You have a choice to upgrade to a larger intercooler to fit your needs or application over the standard intercooler core.
  • Oil Block Non-oil cooled truck.  If you have an none oil cooler truck and want a clean simple way to access your oil pressure for the turbo.
  • CATCH CAN.  Used to catch any access oil from your engine crank case prior to going into the engine. 2 types, a PCV type and a NON pcv type.

THIS PRODUCT IS FOR OFF-ROAD USE ONLY!!!

 


Stage 3 GM turbo kit.
Click To Enlarge
  • Item #: Stage 3 GM Turbo kit
  * Marked fields are required.
*
*
*
*
*
*
Qty*
Price $3,795.00